33
c)
Remove the SIM Card
Follow the instructions above to access the SIM and remove the battery. Then remove the
SIM by pulling back the SIM door and removing the SIM from the cradle.
4.3 Install the SATcase App
Download the SATcase APP from the APP Store (if using an iPhone) or Google Play (if
using an android).
4.4 Activate the SIM Card
Register all personal information and preferences on the SATcase APP setup page. After 24
hours the SIM card will be activated.
4.5 Switch on SATcase
Remove the SATcase sleeve (following heading 4.1) and press the power button on the
SATcase keypad.
4.6 Pair the SATcase and Smartphone
When the SATcase APP is loaded, it will prompt the user to activate the Bluetooth. Once
activated on the Smartphone, you need to search for the SATcase’s Bluetooth ID. The
SATcase must be turned on for the Smartphone to receive it. Once found, the SATcase ID is
stored on the APP and stored for the next time used.
4.7 Insert the Smartphone
Sliding the bottom of the sleeve apart will present the area where the Smartphone is to be
positioned.
Slot the top of the Smartphone in to the sleeve first. Once flush, lock the Smartphone in to
position by connecting the bottom part on to the sleeve. As shown below: