34
The Sleeve that comes with the SATcase should be custom to your personal Smartphone.
To check if the sleeve is correct for you Smartphone, refer to your Smartphones user manual
and make sure the charging port type matches the connector inside the sleeve.
There are a variety for sleeves that fit different Smartphones. Please visit SATcase.com to
find out which Smartphones fit inside the SATcase. You can purchase additional sleeves if
you want to upgrade your Smartphone or have multiple Smartphones.
Please note:
•
The SATcase Is limited to connecting to one Smartphone at a time. The SATcase can
swap between Smartphones once Bluetooth is repaired. The sleeve can also be
swapped with an alternative sleeve.
•
If your Smartphone does not fit a sleeve, you can connect the Smartphone to the
SATcase via Bluetooth and use the device externally.
4.8 Insert the SATcase sleeve
Cover with the top of the sleeve until a click feedback completes the assembly of the sleeve.
Place the bottom of the sleeve in the bottom of the SATcase bed at a slight angle and push the
top of the sleeve flush into the SATcase, making sure the double lock is unlocked and not
obstructing the path of the sleeve.
Flick the double lock down into its functional position to create an IP68
1
watertight seal.
Before removing the sleeve, make sure the surrounding areas are dry, if there is any liquid on
it, please wipe it with a clean cloth.