background image

DG-1 

SATEL 

 

Fig. 3. Alignment of the matchmarks when closing the detector housing. 

 

4.  Technical data 

Nominal supply voltage (±15%) ................................................................................... 12 V DC 
Current consumption, standby: 

DG-1 CO ............................................................. 9-20 mA 

 

DG-1 LPG ......................................................... 30-50 mA 

 

DG-1 ME ........................................................... 30-50 mA 

 

DG-1 TCM ....................................................... 80-120 mA 

Current consumption, maximum: 

DG-1 CO .................................................................20 mA 

 

DG-1 LPG ...............................................................50 mA 

 

DG-1 ME .................................................................50 mA 

 

DG-1 TCM ............................................................. 120 mA 

Relay contacts rated load (resistive)  ............................................................... 40 mA / 16 V DC 
Operating temperature range .................................................................................. -10...+55 °C 
Dimensions  ......................................................................................................... ø 97 x 36 mm 
Weight: 

DG-1 CO .................................................................... 63 g 

 

DG-1 LPG .................................................................. 62 g 

 

DG-1 ME .................................................................... 63 g 

 

DG-1 TCM .................................................................. 64 g 

The average life time of DG-1 detector is 5 years. 

SATEL sp. z o.o. 

ul. Schuberta 79 

80-172 Gdańsk 

POLAND 

tel. +48 58 320 94 00 

info@satel.pl 

www.satel.pl 

The latest EC declaration of conformity 

and product approval certificates are 

available for downloading on website 

www.satel.pl

 

 

Summary of Contents for DG-1 Series

Page 1: ...ntended to used as part of a security system The DG 1 series of digital gas detectors includes the following products DG 1 CO carbon monoxide detector DG 1 LPG propane butane gas detector DG 1 ME natural gas methane detector DG 1 TCM soporific gas detector e g chloroform vapors NC TMP COM 12V NC TMP BUZ ON OFF 1 2 3 4 7 5 6 Fig 1 The electronics board of DG 1 CO DG 1 LPG DG 1 ME detectors The elec...

Page 2: ...will trigger the alarm signal visual and audible and open the alarm relay The alarm is signaled by long sounds and LED blinking separated by long intervals 1 second LED blinking sound 1 second interval etc The alarm signaling is on for the whole duration of dangerous gas concentration Also the relay will remain open until the gas concentration drops below the alarm level The gas sensor reaction to...

Page 3: ...nd on the rear housing panel are aligned see Fig 3 10 Switch on power supply of the security system Putting the detector into operation is signaled by three short sounds accompanied by blinking of the LED Notes It is not recommended to install the detector in spaces where industrial type equipment is working During the detector operation the gas sensor heats up The DG 1 detectors are tested during...

Page 4: ...50 mA DG 1 ME 50 mA DG 1 TCM 120 mA Relay contacts rated load resistive 40 mA 16 V DC Operating temperature range 10 55 C Dimensions ø 97 x 36 mm Weight DG 1 CO 63 g DG 1 LPG 62 g DG 1 ME 63 g DG 1 TCM 64 g The average life time of DG 1 detector is 5 years SATEL sp z o o ul Schuberta 79 80 172 Gdańsk POLAND tel 48 58 320 94 00 info satel pl www satel pl The latest EC declaration of conformity and ...

Reviews: