Chapter 4 Connecting to the ETC II
Using PAS Software
32
ETC II Network Communicator
To update a particular setup in your device, check the On-line button on the
PAS toolbar, select a device site from the list box on the toolbar, and then
select the desired setup group from the Meter Setup menu. Click on the tab
of the setup you want to download to the device, and then click Send.
To download all setups to your device at once, check the On-line button on
the PAS toolbar, select the device site from the list box on the toolbar, and
then select Download Setups from the Meter Setup menu.
Uploading Setup from the ETC II
To upload the setup from the ETC II to the site database, check the On-line
button on the PAS toolbar, select the device site from the list box on the
toolbar, and then select Upload Setups from the Meter Setup menu.
Authorization
If communications with your ETC II is secured, you are prompted for the
password when you send new setup data to the device.
Enter the password and click OK. If your authorization was successful, you
are not prompted for the password again until you close the dialog window.
