2 ASP-205
SATEL
3. Description
Explanations for Fig. 1:
enclosure base.
piezoelectric transducer.
tamper switch (tamper alarm triggered if open).
battery.
cover locking screws.
enclosure cover.
Triggering the alarm signaling
The alarm signaling is triggered:
on receiving the start signaling command (this command is sent only during the polling) –
you can configure two different signaling modes for two alarm types (e.g. the burglary
alarm and the fire alarm).
on opening the tamper switch – both optical and acoustic signaling (sound type 1) is
triggered. The signaling lasts for 3 minutes. Opening the tamper switch will not trigger any
signal:
for
40
seconds
after power-on,
