2
ASW-200
SATEL
The ASW-200 smart plug is used to remote control electrical appliances. The device is
available in two versions:
ASW-200 E with E type socket (EURO),
ASW-200 F with F type socket (SCHUKO).
The plug is designed for operation within the ABAX 2 / ABAX two-way wireless system.
It is supported by:
ABAX 2:
– ACU-220 / ACU-280 controller with firmware version 6.03 (or newer),
– ARU-200 repeater.
ABAX:
– ACU-120 / ACU-270 controller,
– ARU-100 repeater,
– INTEGRA 128-WRL control panel.
1. Features
Control of electrical appliances up to 2300 W.
Relay switched on when the voltage is at the zero cross point.
Encrypted two-way radio communication in the 868 MHz / 915 MHz frequency band (AES
standard).
Transmission channel diversity
– 4 channels for automatic selection of the one that will
enable transmission without interference with other signals in the 868 MHz / 915 MHz
frequency band.
Remote update of plug firmware.
Remote configuration.
LED indicator.
Firmware protection against overload and overheating.
2. Description
The ASW-200 plug occupies one position on the list of wireless devices.
button for manual control of the connected appliance (the button works differently
depending on the selected operating mode of the plug
– see “Operating modes”).
