SATEL
GPRS-T1
13
R
– the field refers to the event code to be sent in the Contact ID format. The additional
digit in the Contact ID format indicates whether it is a new event/disarming, or a new
restore/arming. Select this field, if the event code is to denote new restore/arming (click
on the field twice to select/deselect it).
Part.
– the field refers to the event code to be sent in the Contact ID format. Enter in this
field the partition number which will be included in the event message sent to the
monitoring station.
Zone n.
– the field refers to the event code to be sent in the Contact ID format. Enter in
this field the zone number which will be included in the event message sent to the
monitoring station.
Event
– this field is to be used in case of the Contact ID format. It displays description of
the event whose code is entered in the "Code" field. A button designated with three
dots, which opens the editor of Contact ID codes, is also available in the "Event" field.
Note: The test transmission will be sent as an event, if the following parameters and options
are programmed for the monitoring station:
–
GPRS reporting (see section "Starting GPRS reporting") or SMS reporting (see
section "Starting SMS reporting") is activated,
–
object identifier different from "0000" is programmed or "Obtain identifier
automatically" option is enabled,
–
reporting format is programmed,
–
event code different from "00" for 4/2 format or from "000" for Contact ID format is
programmed.
Test transmissions to be sent to telephone numbers
The table allows to define the form in which the test transmissions will be sent to the
telephone numbers programmed in the "GSM telephone, Monitoring stations" tab. Click
twice on the chosen field to select/deselect it (the field is selected if the "x" symbol is
displayed in it).
SMS
– select this field, if the converter test transmission is to be sent to the selected
telephone number in the form of SMS message.
CLIP
– select this field, if the converter test transmission for the selected telephone
number is to be realized with the use of CLIP service (the converter will dial the
programmed number and then will be trying for 30 seconds to get through
- the converter telephone number will be displayed in the telephone).
Note: Do not answer any call from the converter, if the CLIP test transmission is to be
effected without incurring any costs.
CLIP settings
The table makes it possible to determine in detail how the CLIP test transmissions are to be
sent to the four telephone numbers programmed in the "GSM telephone, Monitoring stations"
tab. Click twice on the chosen field to select/deselect it (the field is selected, if "x" symbol is
displayed in it).
Acknowledgement
– select this field if the converter is to wait for the acknowledgement of
receipt of test transmission using the CLIP service. In order to acknowledge receiving the
CLIP test transmission, reject the call coming from the converter.
Retries number
– if the "Acknowledgement" field is selected, the test transmission with the
use of CLIP service can be conducted a specified number of times. Values from 1 to 15
can be programmed. Acknowledgement of the CLIP test transmission receipt will make the
module stop repeating such a transmission (e.g. if the test transmission is programmed to
