SATEL
INT-S-GR / INT-S-BL
4
4. Programming the Partition Keypad Settings
The partition keypad can be programmed by means of the LCD keypad (
Á
Service mode
Á
Structure
Á
Hardware
Á
Expanders
Á
Settings
Á
expander selection
) or a computer with
the DLOADX / DLOAD64 program. Described below are settings and options available for
programming. Abbreviations from the LCD keypad display are shown at some of the
functions.
Name
– the option to give an individual (16-character) name to the module. This option can
be accessed in the LCD keypad as follows:
Á
Service mode
Á
Structure
Á
Hardware
Á
Expanders
Á
Names
Á
expander selection
.
Partition
- assignment of the keypad to a partition selected from the list.
Lock feature
– the option available in the LCD keypad – its activation provides access to the
Lock
submenu.
Lock
(DLOADX) /
Lock feature
(DLOAD64) – its activation provides access to the lock
feature options.
The options "Lock feature" (LCD / DLOAD64) and "Lock" (DLOADX) refer to operating
the electromagnetic door lock
or another device that requires the access control) to be
operated by
means of the partition keypad.
This function is made available to any user
selected in the „Users” option. The operation is effected by controlling the
NO
relay contacts
(closed; open). The normal (basic) state of the relay contacts depends on how the „Relay
type” option is set. Description of the function refers to a typical application.
Figure 4. DLOADX program window with partition keypad options.
