SATEL
INT-SCR-BL
8
Backlight
– the module provides information on execution of or refusal to execute an operation by
means of blinking of key backlight (see: control panel user manual).
Backlight
– defines the mode of keypad illumination.
No
– keypad backlighting disabled.
Auto
– keypad backlighting goes on automatically on pressing any key.
Note: Automatic keypad illumination is ON for approx. 40 seconds from the moment of its
activation or from the last press of any key.
Permanent
– keypad backlighting is permanently “ON”.
Delay activation time
– the time period during which the zones with reaction type 3
. I
NTERIOR
DELAYED
(belonging to the partition to which the keypad is assigned) will act as delayed ones.
The countdown will start running after the code is entered or the card is read in. After expiry of the
programmed time, the interior delayed zones will again act as instant ones, unless the partition is
disarmed.
No auto-reset after 3 tampers
– you can disable the feature limiting to three the number of tamper
alarms from the expander (the feature prevents the same events from being logged repeatedly and
applies to the successive uncleared alarms).
8. Specifications
Supply voltage ..................................................................................................................12 V DC ±15%
Standby current consumption...................................................................................................... 105 mA
Maximum current consumption ................................................................................................... 125 mA
BELL output load capacity............................................................................................................. 30 mA
Reader operating frequency ....................................................................................................... 125 kHz
Relay contacts rating (resistive load)..................................................................................2 A / 24 V DC
Environmental class ............................................................................................................................. IV
Operating temperature range ............................................................................................... -25...+55 °C
Maximum humidity........................................................................................................................ 93±3%
Dimensions.................................................................................................................. 47 x 158 x 24 mm
Cable length .......................................................................................................................................4 m
Weight .............................................................................................................................................297 g
The declaration of conformity may be consulted at www.satel.eu/ce
SATEL sp. z o.o.
ul. Schuberta 79
80-172 Gda
ń
sk
POLAND
tel. + 48 58 320 94 00
info@satel.pl
www.satel.eu
