SATEL
INT-SK-GR
4
4. Quit the service mode or the communication session with PC and save the data in the
FLASH memory.
5. Programming the partition keypad settings
The partition keypad can be programmed by means of the LCD keypad (
Á
Service mode
Á
Structure
Á
Hardware
Á
Expanders
Á
Settings
Á
expander selection
) or a computer with
the DLOADX / DLOAD64 program. Described below are settings and options available for
programming. Abbreviations from the LCD keypad display are shown at some of the
functions.
Figure 4. DLOADX program window with partition keypad options.
Name
– the option to give an individual (16-character) name to the module. This option can
be accessed in the LCD keypad as follows:
Á
Service mode
Á
Structure
Á
Hardware
Á
Expanders
Á
Names
Á
expander selection
.
Partition
- assignment of the keypad to a partition selected from the list.
Lock feature
– the option available in the LCD keypad – its activation provides access to the
Lock
submenu.
Lock
(DLOADX) /
Lock feature
(DLOAD64) – its activation provides access to the lock
feature options.
The options "Lock feature" (LCD / DLOAD64) and "Lock" (DLOADX) refer to operating
the electromagnetic door lock
or another device that requires the access control) to be
