SATEL
INT-SK
11
•
the
LED goes out after 60 seconds (Grade 3),
•
quick arming functions are not available,
•
arming procedure cannot be initiated, if there are violated zones in the partition or there is
a trouble in the system,
•
the partition will not be armed if, at the moment of completion of exit delay countdown:
– there is a violated zone in partition which was not violated when the arming procedure
was started,
– there is a trouble which did not exist when the arming procedure was started.
5. Specifications
Supply voltage .................................................................................................... 12 VDC ±15%
Standby current consumption .......................................................................................... 35 mA
Maximum current consumption ........................................................................................ 55 mA
Relay output (resistive load) ................................................................................. 1 A / 30 VDC
Environmental class according to EN50130-5 ......................................................................... II
Operating temperature range ............................................................................... -10°C...+55°C
Maximum humidity .......................................................................................................... 93±3%
Dimensions .................................................................................................... 144 x 80 x 27 mm
Weight ............................................................................................................................... 160 g
