SATEL
INTEGRA 128-WRL
7
INT-GSM LTE. LTE communication module.
Enables reporting events as well as operating
and programming the alarm control panel via the cellular data network
(LTE/HSPA+/EDGE/GPRS).
The INT-GSM / INT-GSM LTE module can be connected to the keypad bus of the
control panel or to the RS-485 bus of the ETHM-1 Plus module. If the ETHM-1 Plus
module is connected to the control panel, it is recommended that the INT-GSM /
INT-GSM LTE module be connected to the RS-485 bus of the ETHM-1 Plus module.
INT-RS / INT-RS Plus. Interface for systems integration.
Makes it possible to connect the
computer with the GUARDX program, report events through a special external device,
or operate the control panel using software other than that offered by SATEL.
4.2 Modules to be connected to the expander bus
INT-RX / INT-RX-S. 433 MHz keyfobs receiver expansion module.
Enables operation of
the alarm system using the 433 MHz keyfobs.
INT-CR. Proximity card arm/disarm device.
Enables arming / disarming and alarm clearing
in many partitions by means of proximity cards, proximity tags and other passive
transponders.
INT-S / INT-SF / INT-SK. Partition keypad.
Enables arming / disarming and alarm clearing
in one partition. Can perform access control functions.
INT-SCR. Multifunctional keypad.
It can work as:
INT-S. Partition keypad.
INT-SCR. Partition keypad with reader.
Functionality similar to that of the partition
keypad.
INT-ENT. Entry keypad.
It allows the user to activate delay for the 3. I
NTERIOR DELAYED
type zones. After expiry of the time period preset on the keypad, unless the
system is disarmed, the interior delayed zones will again act as instant ones.
INT-SZ / INT-SZK. Code lock.
Enables performance of the access control functions.
INT-R. Universal expander for card / chip readers.
Supports the proximity card readers
manufactured by SATEL, readers with WIEGAND 26 interface or DALLAS chip readers.
Enables performance of the access control functions.
INT-E / CA-64 E / CA-64 EPS.
Ekspander wejść.
Umożliwia rozbudowę systemu o 8
programowalnych wejść przewodowych.
INT-ADR / CA-64 ADR. Addressable zone expander.
Adds 48 addressable zones to the
security system. Control panels support the addressable zone expanders with firmware
version 1.5 (or later).
INT-O / INT-ORS / CA-64 O / CA-
64 OPS. Ekspander wyjść.
Umożliwia rozbudowę
systemu o 8 programowalnych wyjść przewodowych.
INT-PP / INT-IORS / CA-
64 PP. Ekspander wejść i wyjść.
Umożliwia rozbudowę systemu
o
8 programowalnych wejść i wyjść przewodowych.
ACU-
220 / ACU-280.
ABAX 2 wireless system controller.
Enables the alarm system to
be operated using the ABAX 2 keyfobs and the ABAX 2 bidirectional wireless devices to
be used in the alarm system.
ACU-120 / ACU-270 / ACU-100 / ACU-250. ABAX wireless system controller.
Enables the
alarm system to be operated using the ABAX 2 / ABAX keyfobs and the ABAX 2 / ABAX
bidirectional wireless devices to be used in the alarm system.
INT-VG. Voice module.
Allows remote operation of the control panel from the telephone
keypad (interactive voice menu). It can store 16 voice messages for telephone
messaging.
