4
Installer Manual
SATEL
– event messaging,
– checking the alarm system status by telephone (DTMF or SMS),
– remote control of the alarm system outputs by telephone (DTMF),
– remote control of the alarm system using SMS messages.
•
Built-in GSM modem to allow remote operation and programming of the alarm system
(300 bps or CSD transmission).
Reporting
•
Reporting events to two monitoring stations:
– several communication formats (including Contact ID and SIA),
– 4 telephone numbers (2 main + 2 backup ones),
– 9 identifiers.
•
Several ways to send event codes to the monitoring station:
– GPRS transmissions (encrypted) – TCP or UDP,
– SMS messages,
– GSM voice link.
•
Capability of reporting events via the Ethernet (TCP or UDP), when the ETHM-1 / ETHM-1
Plus module is connected.
Messaging
•
Event messaging to 16 phone numbers in the form of:
– 16 voice messages played back by an additional module (INT-VG, CA-64 SM or SM-2),
– 64 text messages defined by the installer (PAGER or SMS).
Event log
•
21503 events.
•
A separate memory space to store events required by the EN 50131 standard for Grade 2.
•
Saving the content of received SMS messages to the event log.
•
Event log printing capability.
Users
•
8 master users (administrators).
•
240 users.
•
Capability to assign to the user:
– a code,
– a proximity card (125 kHz passive transponder, which may be in the form of a card, tag,
etc.),
– DALLAS iButton (chip),
– keyfob.
•
Several user types.
•
Authority level determining the scope of access to the system.
Additional features
•
Access control functions realized by means of additional modules.
•
64 system timers to automatically:
– arm/disarm the partitions,
– control the outputs (switching the lights on/off, watering the garden, etc.).
•
Partition timers (1 for each partition), to allow automatic arming/disarming.
