SATEL
INTEGRA 128-WRL
5
Programming
•
Local programming:
– keypad,
– computer with the DLOADX program installed, connected to the control panel RS-232
port.
•
Remote programming by using a computer with the DLOADX program installed via:
– telephone network (modem),
– Ethernet (optionally, if the ETHM-1 / ETHM-1 Plus module is connected),
– cellular data network (GPRS transmission).
•
Remote programming from a web browser (optionally, after connecting the ETHM-1 /
ETHM-1 Plus module).
•
Remote programming from a mobile application (optionally, after connecting the ETHM-1 /
ETHM-1 Plus module or installing the INT-GSM / INT-GSM LTE module in the system).
Mainboard
•
RS-232 port (RJ type socket) to allow:
– a computer to be connected for programming (DLOADX program), managing the
system (GUARDX program) or update of the control panel firmware,
– connecting to the RS-232 port of the ETHM-1 Plus / ETHM-1 / INT-GSM /
INT-GSM LTE module (required for remote programming via these modules),
– support for external analog, GSM or ISDN modem,
– serial printer connection (for printing current events).
•
Capability of the firmware updating without the need for disassembly of the control panel.
•
Socket for connecting the INT-VG voice module, CA-64 SM voice synthesizers expander
or SM-2 synthesizer.
•
Real time clock with calendar and battery backup.
•
LEDs indicating the status of outputs, battery charging system and telephone dialer.
•
Electrical protection of all hardwired zones and outputs, and communication buses.
•
Switching power supply with short-circuit protection, provided with a battery status
supervision and low battery disconnect system.
3. Keypads
The INTEGRA 128-WRL control panel supports the following keypads:
INT-TSG
– touchscreen keypad,
INT-TSG2
– touchscreen keypad,
INT-TSH
– touchscreen keypad,
INT-TSH2
– touchscreen keypad,
INT-TSI
– touchscreen keypad,
INT-KSG
– LCD keypad with touch keys,
INT-KLCD
– LCD keypad with mechanical keys,
INT-KLCDR
– LCD keypad with mechanical keys and built-in proximity card reader,
INT-KLCDK
– LCD keypad with mechanical keys,
INT-KLCDL
– LCD keypad with mechanical keys,
INT-KLCDS
– LCD keypad with mechanical keys,
INT-KLFR
– LCD keypad with mechanical keys and built-in proximity card reader.
