2 MDM56
SATEL
Installation and connection of modem to control panel
The MDM56 BO modem can be installed in common housing with the control panel or
individually in the OPU-1A plastic enclosure, much in the same way as other expanders
without power supply, designed for the same control panels.
In order to connect the modem to the control panel, follow the procedure below (for details,
see the installer manual for the respective control panel):
1. Using the cable included in the delivery set, connect the modem RS-232 port to the
control panel RS-232 port.
2. Connect the telephone line wires in parallel to the TIP and RING terminals of control
panel and modem.
3. Connect power from the control panel to the +12V and COM terminals.
4. Program the control panel settings so as to enable interaction with the external analog
modem.
NOTES:
•
If the DWNL-RS function (programming via RS port) is running in the control panel, switch
this function off before you proceed to programming the control panel through the external
modem.
•
The modem requires no configuration, as the factory settings ensure interaction with the
SATEL made INTEGRA and CA-64 control panels.
Specifications
Supply voltage ................................................................................................... 12 V DC ±15%
Mean current consumption.............................................................................................110 mA
Protocols: ......ITU-T V.90, V.34, V.32bis, V.32., V.23, V.22bis, V.22, Bell 212A, V.21, Bell 103
Working temperature range (Class II): ..................................................................-10 to +55 °C
Weight.................................................................................................................................92 g
DECLARATION OF CONFORMITY
Product:
MDM56 BO – PSTN modem for remote
uploading/downloading
Manufacturer:
SATEL spó
ł
ka z o.o.
ul. Schuberta 79
80-172 Gda
ń
sk, POLAND
tel. (+48 58) 320-94-00
fax. (+48 58) 320-94-01
Product description
:
56kbps multi protocol telephone modem dedicated for remote
uploading/downloading of SATEL intruder alarm control panels.
This product meet the essential requirements of the following EU Directives:
EMC
89/336/EWG + 91/263/EEC, 92/31/EEC, 93/68/EEC
R&TTE
1999/5/EC (network connection, TBR21)
Following harmonized standards have been applied for conformity assessment:
EMC: EN 55022:1998; EN 50130-4:1995; EN 61000-4-2/-3/-4/-5/-6
R&TTE: TBR21(1998)
Gda
ń
sk, Poland 2006-04-03
Head of Test Laboratory:
Micha
ł
Konarski
The latest EC declaration of conformity and product certificates can be downloaded from our website
www.satel.pl
