4 PRF-LCD-WRL
SATEL
3. Click on
.
4. The wireless device adding panel will be displayed.
5. In the “Serial no.” field, enter the serial number of the keypad. You will find it on the
keypad electronics board.
6. Press any key on the keypad being added.
7. When the “Device's data read” message appears, click “OK”.
8. Click
to save changes to the control panel.
3.1.2 Keypad
1. Start the service mode.
2. Press successively
to run the 1271.A
DD
function.
3. Enter the serial number of the keypad. You will find it on the keypad electronics board.
4. Press
.
5. When the “Open tamper device” command is displayed, press any key on the keypad
being added.
6. The type and serial number of the keypad being added will be displayed (if nothing
happens, you may have entered a wrong serial number – if this is the case, press
,
to exit the function).
7. Press
.
8. When the “SELECT...” command is displayed, use the
and
keys to select the
address to be assigned to the keypad.
9. Press
. The keypad will be added.
3.2 Removing the keypad from the system
3.2.1
PERFECTA
S
OFT
program
1. Click on the “Hardware” tab.
2. Click on the wireless keypad that is to be removed.
3. Click on
.
4. In the window that will be displayed, click on “Delete” to confirm that you want to remove
the keypad.
5. Click
to save changes to the control panel.
3.2.2 Keypad
1. Start the service mode.
2. Press successively
to run the 1273.R
EMOVE
function.
3. Use the
and
keys to select the keypad you want to remove.
4. Press
.
5. The type and serial number of the keypad to be removed will be displayed.
6. Press
. The keypad will be removed.
