SATEL PRF-LCD-WRL
7
The wireless keypad signals the CHIME from zones not more frequently than once
every 30 seconds. In the inactive mode, the CHIME from zones is only signaled if
W
AKE
-
UP DURATION
is different from 0.
Volume
[251.Keys] – volume level of the beeps generated during keypad operation (key
pressing, confirmation of performed operation, etc.).
[252.Chime] – volume level of the beeps generated after zone violation (CHIME).
[253.Entry delay] – volume level of the entry delay beeps.
[254.Exit delay] – volume level of the exit delay beeps.
[255.Fire alarm] – volume level of the fire alarm beeps.
[256.Burg.alarm] – volume level when signaling burglary, panic and medical (auxiliary)
alarms.
[257.Warn.alarm] – volume level when signaling warning alarms.
[258.New trouble] – volume level when signaling troubles.
Wireless keypad
Filter
[1272.Filter] – the time counted from receiving of the transmission from the keypad.
After it has elapsed and no other transmission is received, trouble will be reported.
Wake-up duration
[213.Wake up] – maximum length of time for which the active mode can
be started automatically. If you enter a value different from 0:
– the active mode will be started automatically when entry or exit delay countdown has
begun, the system has been armed, or alarm has been triggered,
– the CHIME from zones will also be signaled in the inactive mode.
If you enter 0, the active mode will not be started automatically.
If the W
AKE
-
UP DURATION
is different from 0, the keypad will be awaiting for
transmissions with information on events. As a result, the energy consumption will be
growing and the battery life will be considerably reduced.
Wireless keypad initial greeting
[218.Connect msg] – message displayed on the
PRF-LCD-WRL keypad after wake-up. The message is the same for all keypads.
5. Operation
When in active mode, the wireless keypad enables operation and programming of the alarm
system. In order to enter the active mode, press any key on the keypad.
In addition to starting the active mode, pressing a key will also have other
consequences, as appropriate for the given key. The keypad will treat each key
pressing exactly in the same way.
In the active mode, the LCD wireless keypad works much in the same way as the LCD wired
keypad. For the way of using the keypad, please refer to the control panel manuals. The
manuals are available in electronic form on the www.satel.eu website.
