SATELLINE-2ASxE
User Guide, Version 2.0
29
7.2.8 Setting the RTS line functions
The RTS line functions can be set in menu 8.
x
TX Control
The RTS line activates transmission and prevents the radio modem from entering reception. The
radio modem sets the CTS line when it’s ready to accept data for transmission
.
x
RD-line Control
When the RTS line is not active the reception of data to the RD line is disabled. Transmission is not
possible as long as data transmission is present on the channel.
x
Reception Control
When the RTS line goes inactive the reception of data is interrupted. The radio modem goes out of
reception (the CTS line indicates current status) and the TD line is ready for use.
7.2.9 Setting the special functions
Some special functions can be set in menu 9.
x
BREAK character detection
The special BREAK character is detected and transmitted.
x
Slow RX turnaround
In normal operation this function should be turned off. Setting this function on in the receiving end
slows down the packet end detection. If inter character delays in the transmitting end are causing
data loss, setting this function on may help.
1) Set RTS-Line Functions OFF
2) TX Control
3) RD-Line Control
4) Reception Control
Enter selection or ESC to cancel > 1
1) Set Special Functions OFF
2) BREAK character detection
3) Slow RX turnaround
Enter selection or ESC to cancel > 1
