S
E
TTING
Manual Datalogger SenNet DL150 / DL151 / DL170 / DL171 / DL172
66
Satel Spain
Versión 1.01
Figure 41. Overview of the submenu
actions
, within the menu
Configuration
. In this example, 5 have
been set for 5 presence detectors
Select how many actions you want to define and for each action indicate:
▪
Text:
description of the action
▪
Action:
select the type of action:
o
EMAIL: to send an email
o
SMS: to send an SMS
o
OUTPUT: act on an output of the datalogger
o
SENNET 4IO: act on an output of a device SenNet 4Input-4Output
▪
Destination:
Indicate the recipient of the action as appropriate:
o
EMAIL: indicate the recipient's email
o
SMS: indicate the recipient's phone number
o
OUTPUT: Indicate the output number (if it's a datalogger's output)
o
SENNET 4IO: Indicate the device's ID and separated by a comma the output on which
to act. For example:
o
For SenNet 4IO-RF: 4529.1 where, in this example, 4529 is the serial number of the
device and 1 is the output number 1.
o
For SenNet 4IO-RS485: 203,1 where, 203 is the Modbus ID set and 1 is the output
number 1.
▪
In the next line indicate the expression that defines the action following the instructions in the
menu Help. For example:
$dig(1) and ($timer(MTWTF__,09:00,18:00) or $timer(_____SS,09:00,15:00))
This expression means that the datalogger must act if the digital input number 1 is active and if
the time is between 9 and 18 pm from Monday to Friday or between 9 and 15 hours from
Saturday to Sunday.
In the buttons on the left you have information on the channels, operators and functions available.
After doing the any change on this screen, click on
Accept
and then on the
Save Changes
button on
the
Configuration menu
.
See 15.9 Save changes, p. 72
Summary of Contents for SENNET DL150
Page 1: ...Dataloggers series Device network DL150 DL151 DL170 DL171 DL172 ...
Page 8: ......
Page 44: ......
Page 86: ......
