10
Using the Remote Control
At the mechanical room of the trailer, the remote will flash, now hold the button down till
it goes to one position retract or extend. At the back of the trailer, extend one Jack at a
time. The jacks must be high enough in the extended position in order to unpin the
axles to lower it to the ground. Remember, the jacks must be high enough to safely
unpin the axles. Once you have deployed the first jack then proceed to the next jack.
On the ramp side, raise the right jack to take pressure off axle. We recommend the
following step by step instructions before operating the trailer.
Remote Control Control Pad Option Press on Hold in until it flashes.
At the Rear Press Extend. Raise Jack to Unpin Axles Lower Jack
