9
INITIAL SET UP
Initial set up begins with securing the unit, deploying platform, handrails, and ramp,
plugging in electrical connections and hooking up water lines. See electrical and
plumbing sections after initial set up and deploying platform and rails. There are two
way of setting up your trailer the remote control and the control pad on the interior of the
trailer.
Securing the Unit
On site, first unhook from tow vehicle. Position the trailer on as level a surface as
possible with the cabin doors facing the event. Always check the trailer wheels. Position
the sidewinder jacks, and jack the trailer up so that it is level front to back and side to
side. This can be done visually or with a level. Remember leveling the trailer side to
side downhill will require you to support the downhill tires with a 2 X 8 boards.
Rear of Trailer Side-Winder Jack (Front)
The
Satellite Suites ™ ADA+2 trailer has two 7,000 pound side-winder jacks located in
the front of the unit. This is designed to keep the trailer stable and secure when in use.