25
HVAC - (Heating, Ventilating, and Air Conditioning)
Turning on the Air Conditioning Unit.
Turn on air conditioning at the control panel in the service area to cool. The setting must
be colder than the inside temperature to operate. The AC/Heating unit's temperature is
measured by the inside cabin thermostat sensor.
1. AC/Heat Control Panel 2. Thermostat Sensor 3. AC Breaker
To operate the air conditioning unit, the main breaker, 20 amp AC breaker, thermostat
and 12 volt converter must be turned on. The main breaker must always be in the on
position.
Turning on the Heat Strip in the AC Unit
Turn on heat at the thermostat in the service area to warm. The Heat Strip temperature
is measured by the inside cabin thermostat sensor. The heat strip will heat the unit
down to the outside temperature. Below that, use the optional forced air heaters if your
trailer is equipped with them.
1. AC/Heat Control Panel 2. Thermostat Sensor 3. AC Breaker
To operate the heating unit the proper circuit breakers, thermostat and the 12 volt
convertor must also be in the on position to operate.