User Manual
London – United Kingdom
www.saten.co.uk
UAE – Dubai
Fourth Floor, 30-31 Furnival Street
sales@saten.co.uk
JAFZA - Al Aweer
Post code: EC4A 1JQ
TEL: +97143205447
TEL: +448456769185
FAX: +97143205448
Figure 22. Exception Menu
4.
Click
OK
to save settings and exit Exception menu.
Note:
The
Trigger Alarm Output
option is not available for models as they provide no alarm in/out.
Understanding Exception Trigger Options
When setting up exception handlers for such features as motion detection and relay alarms, you may
select triggering options to alert you of these exceptions.
The triggering options that you may select include:
•
Pop-up Image on Monitor:
When an alarm is triggered, the local monitor (VGA or BNC
monitor) will display an image in Live Preview mode. This alarm can be configured under the
Popup Alarm Image handle method. For alarms that are triggered simultaneously, images
will be displayed one at a time every 10 seconds (default dwell time). A different dwell time
can be set by going to Menu > Setting > Display > Dwell Time. Once the alarm stops, cycling
of the images will also stop and you’ll be returned to the Live Preview screen.
•
Audio Warning:
Trigger an audible
beep
when exception is detected.
•
Notify Surveillance Centre:
Sends a signal to remote alarm host when exception is
detected (See
Configuring Remote Alarm Host Settings
).
•
Trigger Alarm Output:
Trigger an alarm output when exception is detected. Alarm output
can be configured by following the steps listed in
Sensor Alarm Settings.
Note:
The
Trigger Alarm Output
option is not available for models as they provide no alarm in/out.
