SatX/SE300—
Front Panel Operation
Proprietary and Confidential
32
3.
Possible values:
o
ON
– Flow control is enabled.
o
OFF
– Flow control is disabled.
4.
Click
OK
to select an item.
4.2.2.3.2
SFP
4.2.2.3.2.1
Auto-Negotiation
Sets the speed selection protocol of the SFP port.
1.
Click
OK
to change.
2.
Browse using the
▲
▼
arrow keys.
3.
Possible values:
o
Enabled
– communication parameters are negotiated automatically.
o
Disabled
– User needs to set the speed and duplex parameters.
4.
Click
OK
to select an item.
4.2.2.3.2.1.1
Speed
Sets the speed selection protocol of the SFP port.
1.
Click
OK
to change.
2.
Navigate through the list using the
▲
▼
arrow keys.
3.
Possible values:
o
10
– Sets speed at 10Mbps.
o
100
– Sets speed at 100Mbps.
4.
Click
OK
to select an item.
According to 802.3, 1Gbps can only be auto negotiated.
4.2.2.3.2.1.2
Duplex
Sets the speed selection protocol of the SFP port.
1.
Click
OK
to change.
2.
Navigate through the list using the
▲
▼
arrow keys.
3.
Possible values:
o
Full
– Full duplex is enabled.
o
Half
– Half Duplex is enabled
4.
Click
OK
to select an item.
4.2.2.3.2.1.3
Flow-Control
Sets the physical port type of the SFP port.
1.
Click
OK
to change.
2.
Browse using the
▲
▼
arrow keys.
3.
Possible values:
o
ON
– Flow control is enabled.
o
OFF
– Flow control is disabled.
