SatX/SE300—
Front Panel Operation
Proprietary and Confidential
65
4.2.7.1.20
Auto-CCM-Mode
Activating or deactivating the auto CCM option. This is most often used for low SNR reception
conditions. In this mode, the demodulator automatically detects the ModCod and makes no change in
it. It does not try to lock on the header and improving reception quality is possible as no lock is required.
This is possible even when the device is under low SNR conditions and the information can be received
correctly.
1.
Navigate through the list using the
▲
▼
arrow keys.
2.
Possible values:
Enable
or
Disable
.
3.
Select an item by clicking
OK
.
4.2.7.1.21
Advanced ACM Mode
Activating or deactivating the Advanced ACM option. The demodulator will initiate ACM messages when
it detects a dramatic change in signal SNR. It is most often used for links with fading changes of 1dB/sec.
For further details please refer to Chapter 6.
1.
Navigate through the list using the
▲
▼
arrow keys.
2.
Possible values:
o
Disable:
Normal operation.
o
Enable:
Enable advanced ACM messages when the demodulator detects a dramatic change in
signal SNR.
3.
Select an item by clicking the
OK
key.
4.2.7.2
Channels
4.2.7.2.1
Channel 1
1.
Navigate through the list using the
▲
▼
arrow keys.
2.
Select an item by clicking the
OK
key.
4.2.7.2.1.1
ISI Range
Selects the incoming data stream format (DVB-S2 and SATX only). The demodulator extracts a specific
stream, according to the given range set on the dual channel.
1.
Enter a value using the numeric keypad.
2.
If hexadecimal letters are required, use the
▲
▼
arrow keys.
3.
Possible values: 00 to ff.
4.
Click
OK
to accept the value.
4.2.7.2.2
Channel 2
1.
Navigate through the list using the
▲
▼
arrow keys.
2.
Select an item by clicking the
OK
key.
4.2.7.2.2.1
ISI Range
This feature is Identical to channel 1 fields, but applicative for channel 2 data.
4.2.7.2.3
MGMT channel
1.
Navigate through the list using the
▲
▼
arrow keys.
2.
Select an item by clicking the
OK
key.
