15
1.
Please use the two with a standard RJ45 crystal connector cable, the
thermal image monitoring system network interface connected to the
router or switch. Then will the router is connected to the computer
network.
2.
Power line and an external power supply is connected, after connecting,
when energized, PTZ will check once, if the test is successful, the console
will remain in a fixed position. Only when self is completed, can be to the
pan-tilt other operations. For example: testing the basic normal
movements.
Note: because the tilt circuit capacitance discharge phenomenon, so the
head off after 1 minute can again be energized, otherwise the platform
will likely identify cut-off process.
5 Devices connection
Connect thermal imager
