UMTI User Manual
UMTI
Page 7
3.2
Installing the Battery Pack
Please Note
:
Charge the battery pack before using it for the first time.
1.
Ensure that the camera is powered off and twist the battery cover anti-clockwise, see image
below, until the battery cover becomes removable.
2.
Insert the battery pack with the terminals facing downwards.
3.
Push the battery pack all the way in and twist the battery cover clockwise until tight.
Caution:
Remove the battery pack when the camera is not in use for long periods.
Battery Status Symbols
The following icons indicate the battery status on the OLED screen.
Sufficient battery charge
Low battery
Replace or recharge battery
