YRH
Coal Mining Infrared Camera
21
then the image display is adjusted by the key “A” or manually.
（
4
）
Auto shut down the camera
This is to set the camera that whether it needs to auto-shut
down when un-using for a long time. There are 4 selections:
“never”/“2min.”/“5min.”/“10min.”.
（
5
）
Auto shut down the screen
This is to set the screen that whether it needs to auto-shut
down when un-using for a long while. There are 4 selections
for saving the power system: “never”/“30 sec.”/“60 sec.”/“2
min.”.
（
6
）
Period of auto- adjustment
This is to set the period of auto-adjustment. It has
“standard” and “short period” 2 selections. If the user selects
“ standard”, the camera will auto-adjust in every 2 min.; if the
user selects “short period”, the camera will auto-adjust in every
1 min.
(7) Initialized file name
It shows the current file name, there is no necessary for the
user to change the file name. In NULL status, press ‘C’
＋
‘A’
＋
‘S’
will reset the initialized file name to sat00000
。
(8) Directory name
It shows the current Directory name, the user can change the
name and the camera will create the new DIR name and use it
when save images.
(9)Trigger Button Setting
This is to setting the control switch of YRH
.It has “None”
、
“Save”
、
“Auto-Adjust”
、
“Laser” four selections
。
