YRH
Coal Mining Infrared Camera
23
5 YRH Operation Examples
5.1 Insert Batteries
When the user uses YRH IR camera for the first time, the battery
may be in low status. The user can charge the battery with the special
charger. (Specific introduction referred to Battery System).
(1) Insert battery
：
Hold the knob and take off the battery
compartment cover, put the battery into the compartment and push it
to the bottom, and then close the compartment cover.
(2) Take out the battery
：
take off the cover and push the battery
in a opposite direction.
5.2 Startup
Press the Power switch key and hold it on about 3 seconds to start
the IR camera, and the image of SAT logo with color ribbons is
displayed in the screen as below. It means the camera is starting up.
After 30 seconds, SAT logo is displayed at the top left corner of
the screen, and the temperature and color scale are displayed on the
right; a status bar is displayed on the down corner. Now the IR
camera has completed the startup.
