THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL|
THE PROFESSIONAL EQUIPMENT------------------|USER’S MANUAL|
09-Digital Satellite Meter
Digital Satellite Meter-10
3.1.11 DisEqc type & Input:
Press ◄►key to set the port
type or number, which get the RF signal from the LNB, if
the LNB is connectedto DiSEqC switching box.
3.1.12 Motor:
If you use the equipment of motor, Accord-
ing to your motor category, the meter providesDiSEqC1.2/
USALS. This will make you have exactin formation to dir-
ect your antenna toward a satellite.
Press ◄► key to select Motor type, then press OK key into
interface of motor set.
USALS SET
￭
Frequency:
Press ◄►key to select the TP.
￭
Satellite Pos:
Position of satellite, input the value by using
the nu meric keys.
￭
My Longitude & My Latitude :
Position of local, Input the
value by using the nu meric keys.
￭
Pos Command:
Check the signal locked, the motor moves
correct position,press OK key to store the present position.
￭
Satellite:
Press ◄►key to select the desired satellites.
DiSEqC1.2 SET
￭
Go to Reference:
A starting point for the satellite search fun-
ction can be selected by pressing the OK key. If the signalis locked,
the present position is automatic stored.
￭
Frequency:
Press ◄►key to select the TP.
￭
Satellite:
Press ◄►key to select the desired satellite.
￭
Move Step:
The satellite now can be turned into the desired
direction using the arrow buttons
￭
Continuous Move:
The satellite can be continu ous moved
to the desired direction.
￭
Set limits for the antenna.
Set Limit:
3.1.13 Unicable setting:
If in the '3.1.2 LNB type' select
you can set SCR.
￭
Unicable type:
You can select '8*SCR”or”4*SCR”.
￭
Channel No. :
You can select SCR channel.
￭
Press ◄► key select frequency of SCR channel or Input the value
by using the numeric keys.
