background image

2

1.  GUIDE

1.1  IMPORTANT SAFETY INSTRUCTIONS

Thank you for choosing our product. Before installation, we would like to re-
mind you some notes, which is very important for operating safely and prop-
erly, as follows:

• 

Be sure to read this user manual before starting your operation.

• 

You must install the dish with correct direction and angle. If the dish is not 
working properly, contact your local dealer.

• 

When the unit is suddenly moved to a hot area from a cold area, it may 
cause some problems. In that case, turn off the power, and turn on again 
after 1-2 hours.

• 

Keep meter placed in clean space with sufficient ventilation.

• 

Do not cover the meter with or place it on a unit that emits heat.

• 

Clean the case by a soft cloth with a little washing liquid.

• 

Do not remove the cover.

• 

Do not let the unit exposed to extreme heat, cold or humid conditions.

• 

No liquids or any other materials to come inside of the unit.

1.2  UNPACKING

Open the package and make sure it includes all below items, if any missing, 
please contact the reseller for replacement.
1.  Digital Satellite Meter
2.  User’s manual
3.  Car charger cable
4. Adaptor
5.  Strap of carrying case

Summary of Contents for WS-6933











Reviews: