5
English
3. THE MENU OSD INSTRUCTION
If you have installed and connected the cables of the meter,open the power
switch, into the main menu.
•
Sat Setting
•
Signal Find
•
Tools
•
SAT Manager
•
TP Manager
•
System Setup
Press
YZ
key
to move the cursor up or down in the menu interface, then use
OK
to confirm a selection.
3.1 SAT SETTING
•
Sat Name: press
AB
key to select satellite.
•
LNB Type: press
AB
key to select LNB Type.
•
Low Freq: press
AB
key to select Low Freq
or press
OK
, then use the
YZ
key to input
the value.
•
High Freq: press
AB
key to select Hi Freq
or press
OK
, then use the
YZ
key to input
the value.
•
TP NUM: press
AB
key to select TP number.
•
Frequency: Frequency of the current tran-
sponder, input the value by using the
YZ
keys.
•
Symbrate: symbol rate of the current tran-
sponder, input the value by using the
YZ
keys.
•
Polarity: press
A B
key to change vertical or
horizontal of polarization.
•
22K: press
AB
key to switch the 22K tone; if
you select universal type, the 22K setting is
AUTO.
•
DiSEqC Mode: press
AB
key to set the type
of port as DiSEqC1.0/1.1 or Unicable.
Summary of Contents for WS-6933
Page 1: ...WS 6933 R Satellite locator User s Manual ...
Page 10: ......
