2
3.
Installation
Rear view
Use the hooking hole shown on the rear of the case to
mount the unit perpendicularly on a wall.
Cautions in Installation
- Mount the unit at your eye level on a perpendicular wall that is free from vibrations.
- Do not mount the unit subject to direct air flow from an air conditioner or a heater.
- Do not expose to direct sunlight or splashing water.
Notes on Use
- Do not move the black pointer by turning the setting nut.
- After completed, be sure to set back the setting needle just under by turning the nut.
- It takes about 30 min. to indicate accurate temperature after unpacked.
- This is a precision instrument. Do not drop or apply impact to it. Doing so may result in malfunction.
- Do not use this instrument in an atmosphere out of measuring range (-30 to 50
°
C).
- Do not use the instrument at a place subject to water splash.
-
In dry, cold seasons, the hygrometer may indicate out of measuring range, but this is normal
since it simply means the relative humidity is below 25%.
- If the unit becomes dirty, wipe it with a dry soft cloth.
- This instrument is not suitable to use for certification purpose.
- It is desirable to check the readings (temp./humid.) with the reliable thermometer (hygrometer) once
a year.
Specifications
Temperature
Humidity
Measuring range
–30 to 50
℃
25 to 95%RH
Accuracy
±
2
℃
±
5%RH (at 20
℃
±5
℃
)
Materials
Case/cover: ABS resin Window: Acryl resin
Dimensions
180(W) mm x 180 (H) mm x 35(D) mm
Weight
approx. 240 g
Made in Japan
3-4, Kanda-kajicho, Chiyoda-ku, Tokyo 101-0045 JAPAN
TEL:+81(0)3-3254-8117 :(0)3-3254-8123
URL: http://www.sksato.co.jp/english/
R.10
hole for hook
