SATO KEIRYOKI SK-1260, Instruction Manual

ⓙ

MAX 

: Lit while the maximum measured value is being  

  displayed

ⓚ

MIN 

: Lit while the minimum measured value is being  

  displayed 

ⓛ

HOLD 

: Lit while measurement data is being held

ⓜ

REL 

: Lit while variation is displayed in HOLD 

  measurement mode

ⓝ

TIME 

: Lit when the time of recorded data is confirmed

ⓞ

DATE 

: Lit while date is being set

ⓟ

Sub 7-segment LCD

:  Display current temperature in HOLD, MAX and 

MIN modes

2. Notes on Use 

Be sure to observe the following precautions in order to use this unit 
correctly. 

・

Do not use this unit as a clinical thermometer.

・…

Do not drop this unit or apply impact to it. This unit is a precision 
instrument. 

・…

Never disassemble or modify this unit. Doing so may result in 
failure. 

・

Do not use this unit in water.

・…

Do not use this unit in a place exposed to direct sunlight or near 
heating equipment. Doing so may result in deformation of the 
casing or failure. 

・…

Do not use this unit in an environment where electrical noise is 
generated. Doing so may result in unstable display or errors. 

・…

Do not forcibly pull, bend, or bundle the sensor cord. Placing a 
heavy object on the sensor cord, heating or scratching the cord 
may also damage it. 

・…

If this unit is not to be used for a long time, always remove the 
batteries from the unit. Otherwise, the batteries may leak fluid, 
resulting in failure. 

p

o

ⓐ

Battery mark : Lit when battery power is insufficient

ⓑ

TIME 

: Lit while time is being set 

ⓒ

Th 

: Lit while the thermistor sensor probe is connected 

ⓓ

K 

:  Lit while the thermocouple (K) sensor probe is 

connected 

ⓔ

REC 

: Lit while data being recorded

ⓕ

: Lit while upper and lower limits are being set

ⓖ

: Lit while Auto power-off function is released.

ⓗ

Main 7-segment LCD : Displays the measured value and so on

ⓘ

Unit of measurement (°C / °F)

Display section

⑩

AC adapter jack 

・

Connect the dedicated AC adapter plug.

⑪

Jack waterproof cover 

・

When measuring temperature in the environment requiring 
waterproof level (IPX 4), mount jack waterproof cover on the 
printer connector and the AC adapter jack. 

⑫

Jack waterproof cover hold unit 

・

When connecting the dedicated printer cable or using the AC 
adapter, remove the jack waterproof cover and mount it on the 
cover hold unit. 

⑬

Battery lid 

⑭

Battery lid fixing screw

3

4