MDR-4330AT USER MANUAL
21
83-00-001-DOC
The user configurable field is the Customer ID, you can enter the name you would like the
Reader to be identified as (This is useful in a large reader networks where you may need to
manage many readers). The name entered in the Customer ID field is the name that will appear
on the Reader Manager Connection menu for that reader. Power cycle the reader for the change
to be reflected in Reader Manager.
Once you have entered the desires reader name press the “Enter” key on your keyboard
then Click the “ Save” button to the right to save your changes to the reader.
System Configuration window
3.4.5 Changing the Reader’s Network Setup
Ensure the Reader is connected as described above. From the Tools menu, select System then
Configuration System as shown in section 3.3.4. The Configuration System window will open. Select
the “Network Configuration” tab as shown below. By default the reader is set to obtain an IP address
from a DHCP server. If this is not desired un-tick the “Obtain an IP address automatically” check box
and enter the required IP Address, Subnet mask & Default Gateway. Press the “Enter” key on your
keyboard then Click the “ Save” button to the right to save your changes to the reader. Power
cycle the reader for the change to take effect.