MDR-4330AT USER MANUAL
8
83-00-001-DOC
3
Getting Started
3.1 Unpacking and Inspection
When you receive your reader, inspect it for any obvious damage that may have
occurred during shipment. If there is damage, notify the shipping carrier and the
supplier of the equipment or Sato Vicinity if purchased directly from Sato Vicinity
Until you have checked the reader, save the shipping carton and packaging materials in
the event the unit has to be returned.
Included with the MDR-4330AT should be the following components:
Reader-writer
Power adaptor
-
12VDC output
Quick Start Guide & Test Results sheet
Reader Manager CD-ROM
The CD-ROM will contain the following 4 files:
Autorun.inf
Will automatically launch the
Reader Manager-Install.exe
Documentation Folder
Contains various PDF documents including User Manuals &
Programmer information
CD-ReadMe,txt
Text file describing all the files on the CD
Reader Manager-Install.exe
The GUI application for configuration and demonstration of all
readers
A power cable is not included with the supply. End-users
should
purchase
a
power cable suitable for the country of use
Ethernet & USB cables are not included with the reader.
Sato Vicinity recommends CAT5
Ethernet cable and a screened USB cable.
An RFID tag will be (required for Hardware Functionality and Communication Testing)
Only power cables and adaptors that are compliant with the
regulations in the country of use may be connected to Sato Vicinity’s
equipment.
USB cable should be USB 2.0, screened & no longer than 3m
As shielded cables (USB and Ethernet) are generally required in order to comply with
EMC emissions limits, only shielded communication cables should be used.
! CAUTION
!
!
