−19 −
bring the unit to the ultra-low temperature or ultra-high temperature
atmosphere or place it in such an environment. Doing so will damage the
electronic circuit inside. The operating temperature range of the
Datalogger is -10 to 60°C. For further information, please see "Specifica-
tions" on page 74.
●
When the Datalogger is used at the temperature 5°C or below
Always turn off the Datalogger at the ambient temperature if it was used
at 5°C or lower.
Moving the Datalogger to a warmer place (room temperature) to turn it off
may form condensation inside and outside of the unit. Condensation can
cause an unstable electronic circuit, resulting in a malfunction.
Note: It is not necessary to observe the above caution when the
Datalogger stops operation due to a memory full state, as it
automatically turns off. However, be sure that the unit surface is dry
and no water drops are present before turning it on again.
●
Never wet the Datalogger, as it is not waterproof.
●
The air vent on the sensor is designed to improve the response speed.
Do not cover the vent with vinyl tape or the like. Protect the vent from
water splash.
●
When the unit is hung on the wall, make sure that it is securely fastened.
Summary of Contents for 8161-00
Page 33: ...31 6 Confirm Installation window appears Click next to start the installation...
Page 51: ...49 4 From the Setting menu click ID D 5 The confirmation message appears Click OK...
Page 68: ...66 Create and type an easily identifiable name for the data...
Page 79: ...77 ACCURACY OF R HUMIDITY...
