OS-214EX
User Manual
53
6 Specifications
This chapter provides specifications for the printer.
Specifications are subject to
change without notice.
Argox reserves the right to enhance and modify the specification without
prior notice. Please check Argox sales representative for most updated
specifications.
6.1 Printer
Model
OS-214EX
CPU
32 bit RISC microprocessor
Print method
Direct Thermal and Thermal Transfer
Resolution
203 dpi (8 dots/mm)
Media Alignment
Left
Operation Mode
Standard: Continuous
mode, Tear-off mode
Optional: Cutter mode
Sensor
Media Sensor: Reflective
Ribbon Sensor
Print Speed
6 inches/sec (Max.)
Print Length
Max 100"(2540mm)
Print Width
Max 4.25"(108mm)
Print Darkness
Darkness level: PPLB TT SD 0~30
Default: PPLB TT SD 5, DT SD 8
Max Printable Area
Max. 100”
Print Ratio
Average print ratio within 15 % or less (whole print layout
area)
Full width with 1mm pitch is required
Communication
Interface
USB (Type A and Type B), Ethernet, RS-232
Programming Language
PPLA+PPLB+PPLZ
Optional Accessories
Cutter,
Stacker
On-Board Memory
Standard Memory (Flash ROM): 16 MB
Standard Memory (SDRAM): 32 MB
