1:
B
ASICS
CS-9018 Operator’s Guide
9
Grounded (Earthed) Products
This product is equipped with a three-wire electrical grounding-type plug that has a third pin
for grounding.
For safety reasons this plug will only fit into a grounded electrical outlet.
Do not remove the ground pin or defeat this safety feature by trying to insert it into a non-
grounded outlet.
Power Sources
The product should be operated only from the type of power source indicated on the
product’s electrical rating label.
Accessibility
Be sure that the power outlet you plug the power cord into is easily accessible and located
as close to the equipment operator as possible. When you need to disconnect power to the
equipment, be sure to unplug the power cord from the electrical outlet.
Safety Covers and Enclosures
To prevent access to areas containing hazardous energy levels and mechanical parts in
movements, this product has enclosures and safety covers.
The closure of the covers is detected by switches. All the mechanical parts in movement
are automatically blocked when the protective cover is opened by the operator.
The enclosures are locked with screws. For this product, observe the following precautions:
Do not remove enclosure covers or attempt to defeat the safety switches.
Repair should be performed by individuals who are qualified in servicing paper processing
and finishing equipment and trained to deal with products capable of producing hazardous
energy levels and mechanism in movement.
Installation Requirements
This product operates safely when used for its intended purpose within its electrical ratings
and product usage instructions.
Replacements Parts
When replacement parts are required, be sure the service provider uses replacement parts
specified by the manufacturer.
Summary of Contents for CS-9018
