7
-Wipe the casing with a dry cloth.
-Keep the appliance in a cool dry
place, away from the dust.
Use after storage
-Check the tank before use, if there
are sediments. Clean if necessary.
-Check the pipe if there is an obstruc-
tion, clean if necessary.
-Check the power cord. If it is dam-
aged, replace it with a new one in the
local service center.
Cleaning the heater
After a long-term high-temperature
operation of the steam-iron there will
gradually form lime scale on the heat-
ing element. Over time, the sediments
can cause clogging of the hose and
reduce the efficiency of the appliance.
Specific performance is less steam
than before or no steam at all.
To maintain the quality of the steam-
ironing it is recommended to clean the
heating element regularly, removing
the lime scale. From the assumption
that the device works every day for
half an hour, it should be cleaned
once every three months in areas with
soft water, and once a month in hard
water areas.
Cleaning methods:
-Pour white vinegar and water into the
tank, mixed in a ratio 1:1.
-Insert the tank into the device, plug
to the power mains, turn on the
switch, let the appliance work for
about 10 minutes.
-After 10 minutes of work turn off the
power, unplug the device, remove the
mixture.
-
Rinse the tank with clean water sev-
eral times until the smell of vinegar
disappears.
TROUBLESHOOTING
Problem
Probable cause
Solution
The appliance does not
work
-The power cord is not
plugged
- The switch is not turned
on
If the power cord is dam-
aged, call to a service
center for replacement
No steam, but the power
indicator lights
-The heater is damaged
-The thermal fuse is
damaged
-The thermostat is dam-
aged
-Replace the heater
-Replace the thermal fuse
-Replace the thermostat
Too little steam
-The hose is clogged with
lime scale
-Mains voltage is too low
-Clean the hose
-Provide a stable power
supply
Tank deformation
Pouring hot water into
the tank
Replace the tank in a
service center
Hot steam in the tank
-The hose is clogged with
lime scale
-The hose is bent
-The nozzle is blocked
-Clean the hose
-Straighten the hose
-Unblock the nozzle
Nozzle leakage
-The nozzle is damaged
-When operating, the
nozzle was lowered below
the body of the device.
-Replace the nozzle
-Поднимите гладильную
головку и расправьте
шланг
Sound from the hose
-The hose is bent
-When operating, the
nozzle was lowered below
the body of the device.
-Lift the nozzle and
straighten the hose
SPECIFICATIONS
Power:
1900 W
Rated voltage:
220-240 V
Rated frequency:
50 Hz
Rated current:
8.6 A
Net weight:
4.10 kg
Gross weight:
4.90 kg
SET
Steam-iron
1
Clothes hanger
1
Trousers hanger
1
Protective mitten
1
Multifunctional brush
1
Collar ironing gear
1
Instruction Manual with
Warranty Book
1
Package
1
Summary of Contents for 67502
