Saturn TSG48-HD, Owner'S Manual

CLEANING INSTRUCTIONS (Continued)

CL

EA

N

IN

G

 IN

ST

RU

C

TIO

N

S (

Con

tinued)

PREPARATION

Turn gas shut-off valve OFF.

Allow griddle to cool before cleaning.

FREQUENCY As Needed

TOOLS

Bristle Brush

Clean Cloth or Sponge

Mild Detergent

Cleaner Formulated for Stainless Steel

Warm Water

CLEANING BURNERS

If one or more individual flame openings does not light, or if the flame

is intermittent or uneven, the burner may need to be cleaned.

Turn shut-off valve OFF. Remove all control knobs and remove front

panel.

Note position of burner assemblies in cabinet. Remove burners.

Examine burner assemblies. Note position of air shutters before

cleaning. Clean food particles from burners with warm water, mild

detergent and a bristle brush. Rinse by wiping with a soft cloth

dampened with clean water. Wipe exterior surfaces dry with a soft

clean cloth. Allow burners to air dry so that interior passages are

completely free of water.

Examine burners to be sure the air shutters are in their proper position.

Reinstall burners with flame openings “up”. The venturi / air shutter

slides over the nozzle of the control valve. The pegs on the rear of the

burner set in corresponding notches in the rear burner support bracket.

The pegs on the front of the burner set on the front support bracket.

Turn shut-off valve ON and light pilot light.

Reinstall front panel and all control knobs.

Test all burners for proper operation.

Procedure is complete.

WARNING:

FIRE HAZARD

Shut off the gas supply

valve before cleaning.

IMPORTANT: DO NOT spill

or pour water into burners or

controls,

DO NOT submerge griddle

cabinet in water. Damage to

internal components will

occur.

Damage to internal

components from water

damage is NOT covered by

warranty.

Page 12