4
brilliance
jubilee
IMPORTANT!
The heat generated and steam pressure may have adverse consequences for
certain materials. Always check before putting the appliance into operation
as to whether the surface or material is actually suitable for treatment
with steam. Do this by executing a test on a hidden surface of the material
you wish to treat. The Sauber Brilliance Jubilee should only be used for its
intended purpose as described in this instruction manual.
Do not attempt to open the security cap when the unit is in use. The
boiler is pressurised.
Read this manual carefully
• This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
• Children should be supervised to
ensure that they do not play with the
appliance.
• To prevent electrical shock, do not
immerse the appliance, power cord or
power plug into water or other liquids.
• Always check the power cord before
use, the power cord and the plug
should be in a good condition and
must not be damaged. If the power
supply cord is damaged or defective, it
must be replaced by the manufacturer,
its service agent or by a qualified
profesional in order to avoid a hazard.
• Do not unplug by pulling on the power
cord. To unplug, grasp the plug not
the power cord. Do not use extension
cords or outlets with inadequate
current carrying capacity.
• Do not handle or operate the appliance
with wet hands and follow electrical
safety precautions at all times.
• Do not aim steam directly at persons,
animals and parts containing electrical
components, such as the electrical
components inside an oven.
• Do not fill the boiler while the power
cord is plugged in. Disconnect the
power supply and unplug the power
cord.
• Do not remove the filler cap while the
appliance is in operation or under
pressure; ensure that it is firmly sealed
before commencing use. When
carrying out maintenance, always open
the filler cap slowly, this will allow any
remaining steam to escape gradually.
• The product is for indoors use only and
not for use outdoors.
• The force and heat of the steam may
damage certain materials. Some
fabrics may react to the temperature of
the steam.
• Do not aim the steam in the same
position for long periods, this can
cause damage to materials!
• Never overfill the tank / boiler.
Overfilling may result in a possible
electrical shock, emission of boiling
water; scalding and steam generation
may be affected.
• Exposure to hot steam can cause
scalding!
Safety Instructions
