8
brilliance
jubilee
Open the security
closure cap to
access the hose
connection (E).
Insert the hose
end (H) into the
connector opening
(E). To click it into
place, press the
switch on the hose.
Turn the heater
switch (D) to 100%.
Turn the locking ring in a clockwise direction,
connect the tube then turn the locking ring in an
anticlockwise direction to fasten. Ensure that the
ring is securely fastened onto the tube. The steam
nozzles, floor brush, diamond shaped brush and
window wiper can be connected by following the
same procedure.
2
4
1
3
Assembly
Remove the cable
and plug the cable
into the power
socket. Close the
cable compartment.
Remove the
patented tank closer
(filler cap) (A) and
with the filling bottle
(O) fill it with water.
Note: Only use clean tap water to fill the water tank. Do not add additives, perfumes or any chemical
substances, refer to “Water filling” section on page 10 for further instruction.
Note: The appliance must only be connected to an AC power supply at the voltage shown on the rating label.
Press the button
for the cable
compartment (G)
3
1
2
Start the unit
