6
18. Do not operate without water in the water
tank.
19. Do not fill the water tank with anything other
than water. Never put additives (such as
perfume disinfectant, eucalyptus oil, stain
remover or products containing alcohol) in
the water as they may damage the steam
cleaner or make it dangerous to use.
20. Empty the water tank after every use when
the steam cleaner is not in use.
21. Do not touch any hot areas on the steam
cleaner. It is normal for the steam cleaner to
heat up during operation.
22. The force and heat of the steam may have
an adverse effect on some materials. Always
test the steamer on a small concealed area to
determine if it is suitable for treatment.
23. Accessories become hot during use. Allow
them to cool down before handling them.
24. Use only manufacturer’s recommended
attachments – use of attachments not
provided or sold by us may cause fire, electric
shock or injury.
25. Never point or aim the steam cleaner at
people, animals or plants (risk of scalding!).
26. Do not aim the steam cleaner at electrical
systems or wires.
27. Connecting the steam cleaner to improper
voltage may result in damage to the steam
cleaner and possible injury.
28. Do not use steam cleaner if there are visible
signs of damage or if it is leaking.
29. Do not use on leather, wax polished furniture
or floors, synthetic fabrics, velvet or other
delicate, steam sensitive materials.
30. Never put aromatic, alcoholic or detergent
products into water tank, as this may damage
it or make it unsafe for use.
Before you clean, test first
Your Sauber Steam and Vacuum cleaner is designed to clean hard flooring such as
ceramic tile, vinyl, laminate, marble, stone and sealed hard wood floors. Use of your
machine on waxed or some unwaxed floors may result in a diminished gloss.
The machine is not for use on unsealed wood floors. For best results test in an
inconspicuous area and check the care instructions from your flooring manufacturer.
Warning: Danger of scalding. Please use with caution when using the steam
function. The steam emitted from the machine is very hot.
CAUTION: Surface may be hot. Avoid contact.
