background image

3.4 Housing

Dimensions

KT320: 4.5'' x 3.11'' x 1.39'' (113.2 x 79 x 35.4 mm)
KTT 320, KCC 320, KPA 320: 4.34'' x 3.11'' x 1.39'' (110.2 x 79 x 35.4 mm)

KP 320, KP 321: 4.7'' x 3.11'' x 1.39'' (119.7 x 79 x 35.4 mm)

Weight

KT 320, KCC 320, KP 320, KP 321: 7.27 oz (206 g)
KTT 320 and KPA 320: 7.05 oz (200 g)

Display

2-line LCD screen

Screen: 1.94'' x 1.77'' (49.5 x 45 mm)
2 indication LEDS (red and green)

Control

1 OK button

1 Selection button

Material

Compatible with food industry environment
ABS housing

Protection

IP 65: KT 320, KP 320 and KP 321

1

IP 54: KTT 320

2

IP 40: KCC 320 and KPA 320

PC communication

Micro-USB female connector

USB cable

Battery power supply

2 double AA lithium 3.6 V batteries

Environmental conditions of use

Non-corrosive or combustible gases

Hygrometry: in non condensing conditions
Altitude: 6561' (2000 m)

With the pressure connectors plugged for KP 320 and KP 321.

With all the thermocouple probes connected.

3.5 Directive: FCC part 15

Changes or modifications not expressly approved by Sauermann could void the user’s authority
to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the

FCC   Rules. These   limits   are   designed   to   provide  reasonable   protection   against   harmful   interference   in   a  residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct
interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

10

TECHNICAL FEATURES

Summary of Contents for Class 320

























Reviews: