4
USE OF THE DEVICE
4.1 Display
The selected values to display during the configuration with the KILOG software will scroll on the
screen every 3 seconds.
The display can be activated or deactivated via the KILOG software.
At extreme temperatures, the display can become difficult to read and the display speed can slow
down at temperatures below 32°F (0°C). This has no effect on the measurement accuracy.
4.2 Function of LEDs
14
USE OF THE DEVICE
Alarm LED
If the red
“Alarm”
LED has been activated, it has 3 states:
- Always OFF:
no setpoint alarms has been exceeded
- Flashing quickly (5 seconds):
a threshold is currently
exceeded on at least one channel
- Flashing slowly (15 seconds):
at least one threshold has
been exceeded during the dataset
Operating LED
If the green
“ON”
LED has been activated,
it flashes every 10 seconds during the
recording period.
DATASET is finished.
END
Indicates that one value is being recorded.
Flashing: the DATASET did not start.
REC
Flashing slowly: DATASET is between 80% and 90% of the storage capacity.
Flashing quickly: DATASET is between 90% and 100% of the storage capacity.
Constant: storage capacity full.
FULL
The displayed values are the maximum/minimum values recorded for the channels displayed.
MIN
MAX
Indicates the alarm action type: rising or
falling.
Constant: indicates that the batteries have to be replaced.
BAT
ACT
Screen actualization of measured values.
Indicates the channel number which is
measuring.
Temperature in °Fahrenheit.
Temperature in °Celsius.
1
2
3
4
Relative humidity
