5
BLUETOOTH
®
FUNCTION
Data loggers of the class 320 have the Bluetooth
®
function to communicate with a smartphone or a tablet (Androïd or iOS)
via the Mobile application. The data logger is named
“Data logger 320”
in the list of available devices to the tablet or
smartphone. By default, Bluetooth
®
is deactivated on class 320 data loggers. Please see the Kilog software applications
user manuals to activate it.
6
MAINTENANCE
6.1 Replace the batteries
With a 3 to 7 years of battery life*, the data logger guarantees long-term measurement.
To replace batteries:
1.
Unscrew the battery hatch on the backside of the data logger with a cross-head screwdriver.
2.
The battery hatch opens. Remove the old batteries.
3.
Insert the new batteries and check the polarity.
4.
Replace the battery hatch and secure the 4 screws with a screwdriver.
Only use trademark or high quality batteries in order to guarantee proper battery life.
After the battery replacement, the device must be reconfigured.
6.2 Device cleaning
Please avoid any aggressive solvent.
Please protect the device and probes from any cleaning product containing formaldehyde, that may be used to clean rooms
and ducts.
6.3 Safety lock wall mount with padlock
➢
Mount the safety lock support on the desired place.
1.
Set the data logger on the support
starting with the bottom part
2.
Clip the data logger on the support by placing the logger into the mount
3.
Insert the padlock to ensure the safety lock function
The padlock can be replaced by a safety sealed
The data logger can be placed on the screw-mount without the safety lock function
➢
To remove the data logger from the support, proceed on reverse order.
MAINTENANCE
19
1
2
3
1
2
3
4
* On the basis of 1 measurement each 15 minutes at 77°F (25°C).
