!
!
!
Controller Maintenance
1.Use soft cloth with a little soap/water to clean the controller.
2.Do not use
harsh
cleaning tools.
3.If the
controller
is damaged,
call a
service electrician to
replace
it.
Safety and operation information of the controller
Warning:
If the installation and operation instruction is not read or understood, do
not install
. I
n case there should be any dangerous installation and improper
operation.
Install the controller based on the installation instruction otherwise, the temperature in
the steam room will be too high or
not heated enough.
If the controller is installed outside the steam room, the temperature sensor must be
installed in the
steam
room.
Caution:
Do not install the controller wire in the same
conduit
with
high voltage
electric
wire. Do not
install
close to hot water or steam pipe
.
Important:
Before installing the controller, make sure the steam
gen
e
rator power
is
off
otherwise the controller may be damaged.
The instruction includes important safety, operation and maintenance information.
Keep the instruction in the user's hands.
If the steam generator is damaged or does not work normally, do not continue to install
or use the controller. Turn main power supply off.
Page 14
User Manual
Summary of Contents for Xtreme Steam Tech Steamcore Spa II
Page 30: ... s ight s Page 28 ...
Page 31: ... ...