!
!
!
Electrical requirements:
Electricity supply:
1.
Test the voltage of electricity supply and make sure steam
generator
with suitable electric
voltage
is used
.
2.
Insulated copper wire should be used with an anti-heat temperature of 90
and a
specified voltage of 300V. Refer to national or local electricity consumption code for
specifications.
3.
Install an independent circuit breaker between the power supply and the steam
generator so to provide an electricity supply with overflow protection and electricity
leakage protection.
All the connection
s
must be in accordance with national and local
electricity consumption code and be installed by professional
licensed
electricians.
Attention:
to facilitate maintenance, keep the steam engine clean. If the information
provided is limited, do not
touch
the pipeline and electric equipment
.
Attention:
Caution:
to avoid damage to the equipment, do not connect strong electric current
directly to the components.
510mm
435mm
Steam outlet
Safety valve
Water inlet
Water
drainage
Fuse for wire power supply
Power wire hole
C o n t r o l l e r w i r e
and light wire hole
300mm
3
4
0
mm
3
5
0
mm
3
8
5
mm
205mm
2
6
5
mm
2
1
5
mm
1
4
2
mm
2
8
mm
Page 6
User Manual
Fuse for wire
power supply
A suitable metal conduit and metal conduit connector should be used for the main power wiring connections.
(metal conduit connector
required)
Summary of Contents for Xtreme Steam Tech Steamcore Spa II
Page 30: ... s ight s Page 28 ...
Page 31: ... ...