26
27
INSTR
UC
TIONS
FOR INST
ALLA
TION
INSTRUCTIONS
FOR INSTALLATION
WARNING! Failure to install the product
in accordance with all instructions here
in will void the warranty. It can result in
the risk of fire and/or electrical short
circuiting, leading to property damage,
bodily injury, or death.
A licenced professional electrician may
only do the installation of the control unit
in accordance with current regulations. The
person in charge of the installation should
provide the necessary training and return
the user manual to the product owner af-
ter completing the installation. The product
owner should provide access to the manual
to all persons using or operating the pro-
duct.
INSTALLING
THE CONTROL PANEL
For concealed installation, the data cable
can be installed in a protective tube inside
the wall; if this is not possible, it must be in-
stalled on the wall surface.
The control panel must be installed on
the wall, in a place protected from water
splashes.
1. Remove the wall mount from the
device.
INSTR
UC
TIONS
FOR INST
ALLA
TION
2. Thread the data cable through the
hole in the wall mount.
3. Fasten the wall mount to the wall with
screws.